Mini Cooper Key Fob Replacement
If you're in need of a new key fob it's best to get one from a dealership. They're usually more affordable than non-branded ones and come with several options, like rolling down the windows.
They are available online, however they might not work with your vehicle. They have to be programmed to match your car, which may take time and costs money.
Cost
Many newer vehicles come with the remote control key fob, which allows the driver to unlock the vehicle and start it. These key fobs could be costly to replace if lost or damaged. In some cases you may have to replace the entire key fob. You can get an alternative key fob from the dealer or an online retailer.
You can also replace your key at an auto parts shop or a locksmith, depending on the type of key. But, it's important to know that these keys have an integrated chip which communicates with the car's system. This means that if you get an unbranded key fob it won't function properly in your Mini Cooper.
You can buy an extra mini cooper key from a dealer for about $150 when you have a Gen 1 or 2. Locksmiths can change the key for a fraction of the cost, but it's best to have a spare. You can also preemptively order a standard non-remote key which is priced at $60, and will lock and start your car.
GMW Perth, as a BMW and Mini Cooper Service Centre, is equipped to replace BMW or Mini Cooper Keys with genuine parts. Losing your keys can be an immense hassle, however replacing it will make sure that you aren't stranded in your car and end up in wrong hands.
Requirements
If you're thinking about replacing your old key fob, ensure you purchase one that is compatible with your vehicle. It is crucial to do this because the key fob serves a variety of functions. mini cooper key repair is used for opening and starting your car. Certain vehicles also require a specific size fob to function. If your new fob is of the wrong size, it won't fit into the ignition, and could cause problems.
In general the key fobs that are sold at MINI dealerships are compatible with your vehicle. They are also less expensive than those purchased from locksmiths. However, if you're unsure about installing a new key fob, it's better to leave the job to professionals.
The key fob's battery must be replaced periodically. Fortunately, the process is quite simple. The first step is to take the battery that is in the case. To pull the notch on the top of your case open you'll require an object that is thin. Once you've removed the battery, place a new 2032 CR 2032 battery in its place. You can purchase these batteries at your local hardware store or in a supermarket.
The next step is to activate the replacement key fob. This will reconnect the microchip with your vehicle. But if you're not comfortable with this procedure, you can bring your vehicle to a nearby MINI dealer for assistance. You can also talk to the mechanic at your local shop to do this.
Compatibility
The key fob, a small plastic device, enables you to lock or unlock your vehicle. It transmits an audio frequency signal to the car's receiver, and triggers a chime which informs you that the doors are locked or unlocked. This feature is available in a majority of modern cars and can make driving safer. If your key fob is damaged, you'll have to replace it.
Key fobs can be susceptible to damage due to a variety causes. They can fail to function in the event of being dropped, stepped on or simply soaked. In many cases, this leads to the doors not locking or unlocking properly. Additionally the buttons on a key fob could be sloppy or misaligned from frequent use.
You can also use an extra keyfob and give it to your spouse or another driver of the vehicle. This will allow them to have their own Driver Profile and avoid messed-up settings such as mirror position and climate control as well as the position of your seat.
A good replacement key fob will have a similar FCC ID and part code that is the same as the original. This will ensure that the new fob will work with your vehicle's RKE system. The fob should also be cut by a reputable locksmith to match the car's ignition. It needs to be "unlocked" (or "reflashed") in order to program to the vehicle's system installed.
Installation
Modern electronic key fobs offer an array of security and convenience features that you can't find with traditional mechanical keys. However, just like any other vehicle gadget, these fobs may fail at times. When that happens, it's time to call a mobile locksmith.
Test your key fob and check if it needs an upgrade to its battery. If the device doesn't respond to pressing the lock or unlock button, it is most likely dead. The good news is, replacing the battery is an easy procedure. You can purchase replacement batteries in hardware stores, online, or at big-box retailers. You can also consult the owner's manual (which you will typically find on the site of the automaker) for specific guidelines.
The first thing you need to do is remove the backup metal ignition key from the fob and place it aside in a secure place. Inject the blade of a plastic tool or flathead screwdriver into the hole above the spot where the key for ignition made of metal used to be. Then gently pry the cover off, and place it aside in a secure spot. Replace the battery with an CR2032 coin-cell. Make sure that the positive (+) side is facing towards you, then snap the cover back on.